Summary of Accommodation:
- 8 berths in 4 cabins.
- 2 double cabins and 2 twin cabins with crew accommodation forward.
- Yacht fitted out in quarter cut vertical Oak.
- Sole margins in Walnut.
- Soleboards in oak with random plank effect except aft cabin which has plain soleboards with carpet.
- OceanAir "Skyscreens" to all deck hatches.
- Mosquito screens for all opening coachroof ports.
- Grabrails in oval stainless steel.
- Cabin doors in "framed" style with quarter sawn frame and horizontal crown cut matchbook veneer panel.
- All mattresses 7” Profile.
Interior Upholstery:
- Coachroof ports and deck saloon windows have white Oceanair blinds.
- Removable foam backed mast cover in headlining vinyl, with velcro.
- Saloon and navigation seats and backs in Alcantara, double stitched, box design - colour: 5141 STRING.
- Saloon table cover, foam backed, in headlining vinyl.
- Mattress covers - Fabric KH5033/17 Stone.
- Berth templates for mattresses and mattress covers.
- Carpets including whipping for forward cabin and forward starboard double cabin - Stone Fibre.
- Panels upholstered in JAB Melange 1-6673-010.
- Kick Panels upholstered in Diamante 6601 SNOW.
Joinery Style:
- Sculpted fiddles and grabrails.
- "Shadow-gap" joints between joinery panels.
- Solid, shaped oak and stainless steel grab handles.
- Solid "framed" styled doors, with laid veneers and soft-close seals.
- Oyster “custom” veneered floor panels.
- Upholstered and padded panels for headboards, seating and berth sides, where appropriate.
- Rolled edge, vinyl-covered mouldings for the saloon deck/coachroof carlin line.
- Off-white inside frames to deck saloon windows.
- Stitched panel detailing to upholstered seat cushions.
- Wide sole margins in solid walnut.
General Material Details:
- Exposed hull and deck surfaces are lined, principally with fabric-covered ply panels, which are demountable for access.
- Insides of upper lockers in heads and galley are white mica laminate. Lockers in the saloon and all upper lockers in cabins are timber-lined with removable outboard panels. Hanging lockers are Cedar-lined. Lockers are fitted with shelves and fiddles.
- Cabin soleboards are removable and are fitted with flush lifting rings and machine screws into captive inserts, as appropriate.
- All drawers use metal runners with soft-close. Door furniture with chrome hinges and handles.
- Headlining vinyl is an off-white fabric. This is also used to cover the deck saloon sides.
- Hullports are set into GRP liner mouldings.
Hatches, Windows and Ports:
- Long Gebo Econoline port from aft starboard cabin to cockpit with flyscreen and blind.
- Falcon Cub fixed hullports, except in galley and aft cabin where there are 3 opening port.
- Flush Seaglaze deck hatches.
Description of layout from forwards:
Sail Locker:
- Overhead hatch covered in teak.
- Teak slatting on hull side for ventilation. Flocoat hull and deckhead in white.
- SS ladder on bulkhead.
Forward Cabin:
- Berth surround in timber.
- Hullside panels split in half: top half is executed in white vinyl and lower half is Panama.
- Full length mirror fitted on inside of cabin door.
Forward Starboard Double Cabin:
- Double berth and hanging locker forward/inboard of berth.
- Mirror fitted on outside of forward bulkhead locker door.
Forward Port Day Head:
- Counter top in TAPIOCA PEARL G50. Satin finish.
- Bulkheads finished in Soft White
- Amtico floor tiles to be Dry Stone Cinder.
- Shower, curtain and rail.
Saloon:
- TV on a powered lift to port side of saloon.
- All deckheads in white.
- Saloon table in oak, framed style to match doors.
Chart Table:
- Chart table fascia in walnut.
- Leecloth eye under overhang of chart table panel to attached Kensington lock for laptop.
Galley:
- Counter tops with satin finish plus upstands and SS basin inserts in TAMBORA.
- Routered grooves for drainage in worktop – forward and aft of sink.
- Stainless steel fiddle bar outboard of cooker.
- Knife rack with a set of 5 Robert Welch knives and sharpener.
- Frosted glass doors to crockery locker and sliding door lockers outboard.
- Flooring in galley in Dakar finish.
Aft Starboard Single Cabin:
- Single berth with basket stowage in locker under.
Aft Head:
- Counter top in HiMacs acrylic inTAPIOCA PEARL G50 with a Satin finish.
- Bulkheads executed in Soft White.
- Amtico floor tiles in Dry Stone Cinder.
Aft Cabin:
- Long mirror inside hanging locker door in aft cabin.
- Sofa on the starboard side.
- Bureau units.
- Quick bulkhead light with separate stainless steel Cabin C-LED stalk reading light beneath.
- Full length mirror on cabin side of heads door.
- 4-brick safe flush fitted in aft cabin wardrobe with digital keypad.
- Kick Panels upholstered in Diamante.
Engine Room:
- Engine room fitted with fire flaps to ducting and remote control release for automatic fire extinguisher.The engine bearers form a self-contained sump to contain and prevent any oil spillage running into the main bilge area.
- The engine bearers form a self-contained sump to contain and prevent any oil spillage running into the main bilge area.
- A limber tube runs through the sump to enable any bilge water from the aft part of the yacht to run forward into the main bilge sump.
- The engine room is built of a Barrifloor sound insulating plywood.
- The engine room is insulated with a composite of foam and high density polymer sound absorbing materials with an overall thickness of 60mm.
- Access panels are fitted with rubber sealing strips to minimise noise and secured by positive catches.
- The engine room has 24v lighting and two 24v x 100mm extractor fans installed and switched at the DC electrical panel.
- These fans are designed to be used, after the engine has been shut down, to evacuate the hot air from the engine.
- An automatic fire extinguisher is installed with a remote indicator light. There is a further automatic fire extinguisher mounted within the generator sound shield, specifically for the generator.
Cockpit:
- The cockpit is split into two distinct areas - the forward part for crew and guests, aft for the helmsman, both sections are self-draining with a total of two 50mm (2”) diameter cockpit drains.
- The twin lectern style cockpit pedestals are custom GRP designed mouldings incorporating all the controls and instruments. There is a pair of stainless steel grabrails to each pedestal.
- Teak cockpit table, with a stainless steel frame and GRP box – varnished with a padded cover with mesh bottomed storage pockets and access flaps. Fitted with Frigomatic DC keel-cooled refrigeration unit.
- 2 Table handles provide support for crew when the yacht is heeled. A hinged lid gives access the GRP fridge within.
- Port and Starboard of the companionway hatch are two rectangular shaped troughs providing useful stowage for small, loose items required on deck.
- Stainless steel mug rack for 2 mugs. Positioned on backs of seatbacks by pedestals.