Terug naar zoekresultaten

Bolt 37

€ 118.000 Exclusief BTW (€ 139.000)
Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37Bolt 37

Wilt u meer weten? Neem contact op met Bach Yachting.

+31(0)320 7… Toon
Bouwjaar 2013
Materiaal Composiet
Lengte 11 m
Breedte 3.5 m

21 HP Yanmar Diesel engine with "sail drive" leg. Very nice racer-cruiser for sale equipped with a full new set of Olympic Macros Sails produced in 2017

Basisgegevens van de Bolt 37

  • Verkoper:Bach Yachting
  • Merk:Bolt
  • Model:37
  • Motorisatie:21 HP Yanmar Diesel engine with "sail drive" leg
  • Categorie:Zeiljacht
  • Bouwjaar:2013
  • Materiaal:Composiet
  • Lengte:11 m
  • Breedte:3.48 m
  • Diepgang:260 cm
  • Variabele diepgang:Nee
  • Land: Turkije
  • Te bekijken in verkoophaven/showroom: Ja
  • Prijs:€ 118.000 Exclusief BTW
  • Accountmanager: Liesbeth Groeneveld



  • Opmerkingen:


    ORC CATEGORIE: 1                          

    Very nice racer-cruiser for sale equipped with a full new set of Olympic Macros Sails produced in 2017 (1 Main, 3 jibs, 3 kites) also same sails Doyle Stratis produced in 2014 + Doyle Cruising laminate Main and jib for delivery.
    Hull, Deck, Bulkheads and stiffners made from multi and unidirectionnal glass, vinylester resine and Gurit M foam over female tooling. All laminations are done with vacuum assisted infusion technique for perfect resine/fiber ratio and low air void.
    - Awl Grip clear coated
    - ISO STRUCTURAL: 12215

    Prepreg carbon fibre rudder stock and blade, vacuum bagged and cured at high temperature.
    Composite Tiller, twin pedestals on request
    Rudder Bearings to be high quality self aligning roller type
    KEEL: 1.900kg (1.600kg in .bulb)
    SAE4340 casted steel fin with CNC moulded composite skins.
    Anthimony lead bulb, casted from CNC milled plug, painted and faired with templates.
    Super-duplex stainless steel studs

    21 HP Yanmar Diesel engine with "sail drive" leg
    2 blade Gori folding racing propeller.
    Spinlock flush throtle level and Spinlock tiller extension
    P: 15.30m
    I: 14.85m
    J: 4.32m
    E: 4.76m
    SPL: 5.81m
    SPA: 145m2
    - Olimpic Sails Mainsail (Macros Membrane Black Kevlar Fiber)
    - Olimpic Sails Medium Jib (Macros Membrane Black Kevlar Fiber )
    - Doyle Code Zero with Selden Furling system
    - Doyle Stratis Mainsail
    - Doyle Stratis Light Jib
    - Doyle Stratis Medium Jib
    - Doyle A2
    - Doyle A1
    - Olimpic Sails A2
    - Olimpic Sails A4
    Designed to meet ORC, IMS, IRC regulations and construction to be lightweight appropriated for racing yachts.
    Basic Galley with plumbed sink, manual water pump and location for moulding a single burners stove with disposable gas bottles connected to the burner
    Engine box with removable portion to allow access to service engine and incorporating nav area
    Manual tap at galley sink, cold water only
    Plumbed in seawater Marine WC, with flush seacocks type
    2 x Manual bilge pump one operable from below deck one from the cockpit
    Flexible water tank

    Cabin lighting under coach roof, galley and nav areas.
    12 volt DC switch panel and battery indicator mounted on the engine box.
    Battery isolator/selection switch mounted on the engine box.
    Gel type batteries for engine start and service
    12 V electrical panel for Engine, rev counter and start stop switches on the engine box.
    Navigation LED lights at masthead
    ORC conforming toerail included in in the deck mould to the foredeck
    Two (2) Harken # 40.2PTA primary winches.
    One (1) Harken # 35.2STA winch in the pit
    Two (2) Harken # 40.2PTA mainsheet winches
    Two (2) Harken # 35.2PTA runner winches
    5 Harken lock-in winch handles
    2:1 Mainsheet system on Harken blocks, lead direct from the end of the track to mainsheet winches.
    Harken adjustable mainsheet traveller with a 6:1 cascade purchase below deck and lead trimmers foot rest
    Twin transverse tracks (27mm mid-range track with #2705B.HL cars), with ball-bearing car system
    In-hauler system, 6:1 lead to cockpit
    Up/Down system, 4:1 cascade with a 6:1 tail purchase (24:1 total) and fitted with a floating ring #C8684
    2 Harken override fairleads #C8541
    Harken spinnaker sheet blocks #3195 mounted on fwd leg of pushpit
    Harken spinnaker sheet diverter blocks #3195 mounted on side decks
    5 Harken Halyard Blocks
    7 Spinlock Jammers (1 x main halyard, 2 x masthead spi, 1 x fractional spi, 1 x jib, 2 x tack lines)
    1 foredeck slide opening hatch with round edges
    Double s/s rail pulpit and pushpit, 8 stanchion, 316 Stainless Steel tubing, tapered towards the top.
    Stainless Steel Lifelines
    Foot chocks for helmsman, main trimmer
    A lightweight companionway wash board
    Mast deck collar with custom moulded resin wedge, adjustable mast step


    HallSpars High Modulus carbon mast with two back swept spreaders
    Nitronic 50 Rod standing rigging.
    Deep carbon race boom
    Internal mast jack
    Aramid backstays
    Solid vang with tail lead below deck 32:1 cascade purchase exiting cockpit sole close to main traveller
    Equipped for 2:1 mainsail halyard, 1 fractional headsail halyard, 1 fractional halyard and 2 masthead spinnaker halyards
    2 Spectra spinnaker sheets with Tylaska snapshackels or equivalent
    2 Spectra jib sheets with soft shackles
    2 Spectra spinnaker tack line with Tylaska snapshackels or equivalent
    1 Spectra mainsheet
    Mainsail traveller lines
    Genoa traveller lines
    Outhaul lines
    Cuningham lines



    B&G Electronics

    Klik hier voor meer informatie

  • Diepgang: 260 cm


  • Slaapplaatsen: Vast: 0
Deze bootgegevens zijn mogelijk via een automatisch vertaalprogramma naar uw taal vertaald. Daarbij kunnen fouten ontstaan. Vraag de verkoper om volledige bootgegevens voordat u tot aanschaf overgaat.

Stuur de advertentie van de Bolt 37 door naar een vriend

Bolt 37

Bolt 37

€ 118.000 Exclusief BTW (€ 139.000)