Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48Atlantic 48

Do you want to know more? Please contact Jachtwerf Atlantic BV & Jachtcentrale Harlingen.

+31(0)517… Show
new boat
Material Aluminium
Length 51.77 feet
Width 14.6 feet

1 Steyr M126 121 hp. The Atlantic 48 is true ocean cruiser, ready for adventure in any weather.

Basic data of the Atlantic 48

  • Seller:Jachtwerf Atlantic BV & Jachtcentrale Harlingen
  • Reference:YFM-118
  • Brand:Atlantic
  • Model:48
  • Motorization:1 Steyr M126 121 hp
  • Category:Sailing Yacht
  • Material:Aluminium
  • Length:51.77 feet
  • Width:14.60 feet
  • Draught:4 feet
  • Variable draught:No
  • Country: Netherlands
  • Price:price on request

Documents

General

  • Designer: Atlantic Nieuwbouw BV & Dick Zaal
  • Shipyard: Atlantic Nieuwbouw
  • Draught: 125 cm
  • Maximum draught: 314 cm
  • Waterline length: 1,378 cm
  • Comments:

    Steering

    • Jefa double steering system in the cockpit with two single spoke stainless steel steering wheels with leather cover. One compass at each steering wheel.


    Lifting throat

    • Electrical/hydraulic system with double working stainless steel cylinder, 2kW generator and separate manual back-up system. The keel system can be managed through control switches from the steering area.

Accommodation

  • Berths:
  • Comments:

    The interior joinery is high grade and stylishly executed in American cherry chosen by client. Style and standard of finish will be as in any yacht built by us to date. Other woodwork finish are available at additional cost.

Engine, electrics

  • Number of identical engines: 1
  • Type: Inboard
  • Brand: Steyr
  • Model: M126
  • Power: 120 hp

Navigation and electronics

  • Comments:
    • Aqua signal navigation lights: three-colour masthead with anchor light, steaming/deck light, port-/starboard lights separate on the pulpit, stern light on pushpit. The navigation equipment is standard Raymarine ST60+ Depth, Speed and Wind system and 2x Plastimo Horizon 135 compass near steering wheels

Rig and sails

  • Sail surface: 6,570
  • Comments:

    Mast

    • Mast by Hall Spars: 1171 tapered aluminum mast section, I = 19.83m, P= 19.33m. AWLgrip white coated mast.
    • Welded-in masthead with aluminum sheaves for in-mast main halyard, boom elevator and two Yankee/Genoa halyards.
    • Two cranes with U-bolts for attachment of blocks for spinnaker halyard.
    • Aluminum crane with stainless steel bushings for attachment of backstay toggle and aluminum fitting with stainless steel bushings for attachement of headstay toggle.
    • Backing plates installed for attachment of capschrouds, intermediates, lower schrouds and babystay.
    • Tangs for attachment of inner forestay with over/under sheave box for staysail halyard and toppinglift.
    • Tangs for attachement of check stays.
    • Two sets of tapered aluminum spreaders. The lower spreaders with strap eyes for attachment of burgee lines.
    • PVC conduit installed up to the masthead to protect wires, including pilot line and cables for navigation lights. PVC conduit installed at front of the mast, including cables for lights and pilot lines for installation of radar cable and antenna cables.
    • Aluminum cable exit installed at front of the mast.
    • Entries for internal lazy jacks positioned under upper spreaders
    • All halyard exits to include stainless steel chafepads.
    • Custom swivel fitting with sheaves and blocks for halyards and reefing lines which can be operated from the cockpit
    • Insulated hard anodized aluminum mast heel with rocker to suit mast step fitting and rake angle.
    • Mounted on mast
      :- Spinlock twin halyard stopper for yankee- and staysail halyard.
      - Andersen ST40 halyard winch-
      1 aluminum cleats 7"/178 mm for boomlift halyard-
      2 Aluminum cleats for lazy jack tails-
      windex-
      3-colour masthead light with anchor light-
      Steaming and deck light with protection guard-
      Frederiksen Full Batten System mounted on the mast.






       


    Boom

    • Hall Spars aluminum boom with tapered outboard end E = 5.20 m in section 8757
    • AWLgrip white coated boom.
    • Welded in outboard ends for:
    • - single line reefing system for first and second reef
    • - reefingline for third reef
    • - outhaul
    • Provisions for 2 internal preventers and attachment for boom topping elevator
    • Stainless steel pad eyes for attachment of two mainsheet blocks
    • Boom set up for loos footed mainsail
    • Frederiksen series outhaultrack + outhaulcar with slide rods.
    • Aluminum cleat installed on boom for outhaul line
    • Provisions for attachment of three point Lazy Jack system


    Standing rig

    • Headstay, backstay (upper part with custom wireblock), capschrouds and lower shrouds, 12mm wire 1 x 19 with rigging screws and studs.
    • Innerstay, babystay and intermediates, 10mm wire 1 x 19 with rigging screws and studs.
    • Backstay leg: 10mm, 7 x 19 stainless steel wire including turnbuckle and backstay tensioner
    • 2 Checkstays 12mm Aramstar
    • Furlex 300 furling system for headstay


    Running rig

    • 1 Main halyard, 14mm Braid with key-shackle
    • 1 Service halyard/Boom topping elevator, 10mm Braid with D-shackle
    • 1 Yankee halyard, 12mm Armastar with D-shackle
    • 1 Staysailhalyard, 12mm Armastar with D-shackle
    • 1 Set of lazy jacks: 3 point connection on the boom
    • 1 Outhaul, 12mm Spectra including tackle and blocks
    • 2 reeflines,12mm Braid for single-line reefsystem (Reef I and Reef II)
    • 1 set reeflines (outboard and tack-reeflines) for Reef III
    • 2 Preventers, 12mm Braid with snap-shackle
    • 1 Mainsheet, 11mm DSK 75 PC
    • 2 Yankee sheets, 14mm Harkon
    • 2 Staysail sheets, 14mm Harkon
    • 2 control lines, 8mm braid for mainsheet traveler
    • 2 control lines, 8mm Braid for genoa/yankee cars
    • Main halyard, reefinglines, outhaul and preventers to be operated from the cockpit


    Furling system

    • Yankee: Furlex 300S furling system for 12mm headstay


    Sails

    • Mailsail: 65.70 m² , 9.5 oz dacron, crosscut cut, Cruising quality with battens and 3 reefs.
    • Sail cover: standard, in color to buyers choice
    • Furling Yankee: 62,90 m², 9.5 oz dacron, crosscut/fanned cut, Cruising quality, fits onto Furlex 300S furling system.
    • Staysail: 23.0 m², 9.5 oz dacron, crosscut/fanned cut, Cruising quality with hanks

Deck Equipment

  • Comments:
    • 2 Andersen 58 ST sheetwinch (cockpit Port and Starboard side)
    • 1 Andersen 40 ST sheetwinch on mast
    • 1 Andersen 46 ST mainsheet winch, on roof dockhouse
    • 4 Andersen 46 ST winches (cockpit Port and Starboard side)

    Mainsheet system from Ronstan

    • 1 track 2 mtr
    • 1 traveller with 2 control line sheaves and stand up block 75mm
    • 2 end cap with 2 control line sheaves and becket
    • 1 single block, 75mm on boom
    • 1 stand up base with 75mm block


    Staysail sheet system from Ronstan

    • 2x track, 2 mtr
    • 2x traveler with plunger stop
    • 2x single foot blocks, 100mm


    Yankee sheet system from Ronstan

    • 2x track, 4 mtr
    • 2x travelers with single control line sheaves
    • 2x end cap with 2 control line sheave and becket
    • 2 Spinlock XTS single clutch for control lines
    • Navtec backstay tensioner
    • 6x aluminum cleats on deck
    • 7x Lewmar low profile hatches
    • 8x Lewmar portholes, fixed in hull
    • 2x Lewmar portholes, opening in superstructure
    • 11x fixed custom made acrylic windows in superstructure
    • 4x Goiot aluminium deck fans
    • 12x stainless steel stanchions mounted with insulation in anodised aluminium stanchion base
    • Stainless steel pushpit and pulpit with navigation light
    • 5x Aluminum deck fills for water, fuel and waste water
    • 1x Whale bilge pump operated from cockpit
    • 2x electric bilge/hose pumps
    • Rocna anchor with 50 mtr chaim and 40 mtr line
    • Lewmar electric anchor winch 24V
    • Bowtruster MaxPower 24V
    • 4 Warps - 6 Fenders -
    • 1 fire extinguishers
    • 1 automatic fire extinguisher in engine room
    • 1 Gas bottle from Camping Gaz, 3 kg
    • 1 flag, flagstaff and stand
    • 2 Andersen winch handles, aluminium
    • Double searailing wire with white PVC cover
    • 1 stainless steel boarding ladder
    • 1 radar reflector
This boat data may have been translated into your language via an automatic translation program. Errors can occur during this process. Ask the seller for complete boat details before purchasing.
Atlantic 48

Atlantic 48

fromprice on request